Portable 2 in 1 gas detector LPTG-A10 is a lightweight, hand held design gas detector. It synchronously detects concentration of CO2 gas and that of another gas like O2, CO, NH3, and H2S. LCD display shows real time measurement values. Used in field detection of multiple gases for quality testing and research purpose.

Sampling methodDiffusion
Sensor typeCO2: solid electrolyte sensor, O2:electrochemical sensor
Detection rangeCO2:0.04 to 5.00 % and O2:0.0 to 30.0 %
Detection accuracyCO2:± 30 % rdg (rdg = reading) and O2:± 3 % F.S. (F.S. = full scale)
Display resolutionCO2:0.01 % and O2:0.1 %
CalibrationCO2:0.04 % revise the zero point outdoors, O2:20.9 % revise the zero point outdoors
DisplayLCD display
Battery shelf lifeAbout 20 hours (when using alkaline dry batteries)
Operation temperature-10 to 50 °C
Operation humidity< 90 % RH (non-condensation)
Power supply#5 dry cell, 4/AC 100 to 250 V
Dimension Host Machine (W*D*H)76 × 27 × 145 mm
Dimension Detector (W*D*H)28 × 27 × 170 mm
WeightAbout 250 g (includes detector, batteries)
HS Code9027100090
  • Equipped with two different types of sensors
  • Synchronous detection of two gases at a time
  • Long probe for narrow room
  • Small volume, Easy to carry
  • Automatic self calibration
Used in bio fuel plants, greenhouse, agriculture, construction, for on field testing of chemical gases and others.

Gas Detectors

Gas Detectors : Portable Multiple Gas Detector LPMG-A10

Portable Multiple Gas Detector LPMG-A10

  • Sampling Method
  • Diffusion
  • Working conditions
  • Temperature -20 to 50°C Pressure 0.9 to 1.1 (standard atmospheric pressure) Humidity 10 to 95 % RH (no dew condensation)
  • Explosion proof grade
  • Exia II CT3
Gas Detectors : Portable infrared gas detector LIGD-A10

Portable infrared gas detector LIGD-A10

  • Measurement principle
  • Non-dispersive infrared  (NDIR)
  • Gas Detected
  • SF6: 0 to 50 ppm range/ 0 to 1000 ppm range (as per req.)
  • Detection Uncertainty
Gas Detectors : Portable Single Gas Detector LPSG-A10
Portable Single Gas Detector LPSG-A10
  • Sampling method
  • Diffusion
  • Measurement principle
  • Electrochemical (oxygen, toxic gases), Catalytic combustion (flammable gases), Infrared principle (carbon dioxide gas)
  • Detector gas
  • Flammable gases, oxygen gas, toxic and harmful gases
Gas Detectors : Handheld C2H4 Ethylene Gas Detector LEGD-A10
Handheld C2H4 Ethylene Gas Detector LEGD-A10
  • Sampling
  • With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection
  • Gas
  • Ethylene C2H4
  • Measure Range
  • 0 to 1000 ppm

Digital Differential Pressure Meter

Digital Differential Pressure Meter : Digital Differential Pressure Meter LDPM-A10

Digital Differential Pressure Meter LDPM-A10

  • Measuring range
  • 0 ∼ 125 Pa
  • Accuracy
  • 0 ± 0.2 Pa (liner error) ± 1 %
  • Operating temperature range
  • 0 °C ∼ 50 °C
Digital Differential Pressure Meter : Digital Differential Pressure Meter LDPM-A20

Digital Differential Pressure Meter LDPM-A20

  • Measuring range
  • ± 500 Pa
  • Repeatability
  • ± 0.2 % FS
  • Resolution
  • 0.1 Pa

Multifunctional Environmental Meter

Multifunctional Environmental Meter : 6 in 1 Multifunctional Environmental Meter LMEM-A10

6 in 1 Multifunctional Environmental Meter LMEM-A10

  • Temperature Measurement Range
  • -10℃ to 60℃
  • Temperature Resolution
  • 0.1°C
  • Temperature Accuracy
  • ± 1.5℃
Multifunctional Environmental Meter : Floor Balance LFRB-A20

Floor Balance LFRB-A20

  • Capacity
  • 50 kg
  • Accuracy
  • 1 g
  • Speed
  • 1 s