Handheld C2H4 Ethylene Gas Detector LEGD-A10 is a portable device with built-in sampling pump having a flow rate of 1 L/min. It meets IP-66 standards which makes it suitable for use in harsh environmental conditions. Rapid speed of sampling, high flow rate, least detection time, compact design, plastic housing, storage space, etc. are some of the features which ensures accurate results in few minutes. It is used in chemical industry, food industry, etc.
| Sampling | With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection |
| Gas | Ethylene C2H4 |
| Measure Range | 0 to 1000 ppm |
| Resolution | 1ppm |
| Precision | 3 to 10% F.S. |
| Response Time | ≤ 10 s |
| Repeatability | ≤ ± 1% |
| Zero Shift | ≤ ± 1%（F.S./year） |
| Display | LCD dot matrix display |
| Temperature | -20°C to 50°C |
| Humidity | 0 to 95 % RH |
| Degree of Protection | IP-66 |
| Alarm | Sound, light, vibration |
| Recovery Time | ≤ 10 s |
| Linearity Error | ≤ ± 1% |
| Gas Unit | Units are switchable |
| Battery | 3.6 V 2300 mAh lithium polymer rechargeable battery operate time is about 12 h continuously charging time: 4 to 6 h |
| Operating Time | 100 h (pump off) |
| Dimensions | 205×75×32 mm |
| Weight | 300 g |
- Highly precise sensors for accurate detection
- Water-proof, dust-proof, explosion-proof
- Response in less than 30s
- Options for units between ppm and mg/m3
- Automatic calibration mode
- Restore factory setting option
- Audio, visual alarm system
- Threshold values for alarm can be set
- 100000 sets can be stored and also re-viewed
- Data transfer through USB (optional)
- Long working hours and rechargeable battery
- Dense plastic housing
- Compact size and easy to use
- Aluminium case to carry the device
It is used to detect ethylene gas. Extensively used in brewing and fermentation industry, cold storage places, agricultural research, chemical labs, paper making industry, bio-pharmaceutical plant etc.
Data Logger
Gas Detectors
Portable 2 in 1 gas detector LPTG-A10
- Sampling method
- Diffusion
- Sensor type
- CO2: solid electrolyte sensor, O2：electrochemical sensor
- Detection range
- CO2：0.04 to 5.00 % and O2：0.0 to 30.0 %
Portable Multiple Gas Detector LPMG-A10
- Sampling Method
- Diffusion
- Working conditions
- Temperature -20 to 50°C Pressure 0.9 to 1.1 (standard atmospheric pressure) Humidity 10 to 95 % RH (no dew condensation)
- Explosion proof grade
- Exia II CT3
Portable infrared gas detector LIGD-A10
- Measurement principle
- Non-dispersive infrared (NDIR)
- Gas Detected
- SF6: 0 to 50 ppm range/ 0 to 1000 ppm range (as per req.)
- Detection Uncertainty
Portable Single Gas Detector LPSG-A10
- Sampling method
- Diffusion
- Measurement principle
- Electrochemical (oxygen, toxic gases), Catalytic combustion (flammable gases), Infrared principle (carbon dioxide gas)
- Detector gas
- Flammable gases, oxygen gas, toxic and harmful gases
Digital Differential Pressure Meter
Digital Differential Pressure Meter LDPM-A10
- Measuring range
- 0 ∼ 125 Pa
- Accuracy
- 0 ± 0.2 Pa (liner error) ± 1 %
- Operating temperature range
- 0 °C ∼ 50 °C
Digital Differential Pressure Meter LDPM-A20
- Measuring range
- ± 500 Pa
- Repeatability
- ± 0.2 % FS
- Resolution
- 0.1 Pa
Multifunctional Environmental Meter
6 in 1 Multifunctional Environmental Meter LMEM-A10
- Temperature Measurement Range
- -10℃ to 60℃
- Temperature Resolution
- 0.1°C
- Temperature Accuracy
- ± 1.5℃
