Temperature and Humidity Test Chamber LTHC-B23 is designed to simulate constant climatic conditions for testing a wide variety of products for their quality, performance, shelf life and stability. It's used to simulate constant temperature and humidity conditions, thereby creating a physiologically ideal environment for product testing. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field.
| Capacity | 800 L |
| Temperature range | (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 5 ℃ / min |
| Overall dimension (D x W x H) | 1280 x 1550 x 2110 mm |
| Temperature heating rate | 3 ℃ / min |
| Temperature fluctuations | ± 0.5 ℃ |
| Temperature deviation | ± 2.0 ℃ |
| Humidity range | 20 % ~ 98 % R.H |
| Humidity deviation | ± 2.5 % RH |
| High temperature | 180 ℃ |
| Lowest humidity | 10 % RH |
| Internal dimension (D x W x H) | 800 x 1000 x 1000 mm |
- Ideal for high and low temperature testing
- Easy to use LCD touch screen controller and a graphic display to allow monitoring of the set and actual working parameters
- Humidity controller
- Corrosion resistant interior chamber
- Observation window: Built-in toughened double layered glass
- Independent R and D software
- Humidity regulation with capacitive humidity sensor
- Inner chamber material : Stainless steel plate
- Thermal-insulating material resistant to high temperature and density
- Compressor overload switch
- Unit shuts down after alarm for over heating
- Safety self-protection function includes short circuit, over temperature, motor overheating, compressor pressure, fuse failure
- Windows with anti - sweat heater device to prevent water from vapor condensation and water droplets
Temperature and Humidity Test Chamber
Labtron Temperature and Humidity Test Chamber offers a wide range of capacities for various testing needs. They maintain precise temperature and humidity control, which ensures uniform distribution across the chamber. Our chambers are designed with advanced monitoring and control systems, including intuitive displays, for easy operation. These chambers ensure accurate and reliable performance evaluations, essential for product quality and compliance with standards.
Temperature and Humidity Test Chamber LTHC-A10
- Capacity
- 50 L
- Temperature range
- (- 20 °C) to 150 °C
- Low type
- I – 40 °C, II – 70 °C
Temperature and Humidity Test Chamber LTHC-B21
- Capacity
- 225 L
- Temperature range
- (-70 )℃ to 150 ℃
- Temperature cooling rate
- 5 ℃ / min
Temperature and Humidity Test Chamber LTHC-C20
- Capacity
- 150 L
- Temperature range
- 10 to 70°C
- Temperature stability
- High: ±0.5℃; Low: ±1℃
Temperature and Humidity Test Chamber LTHC-B11
- Capacity
- 225 L
- Temperature range
- (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃
- Temperature cooling rate
- 1 ℃ / min
Drug Test Chamber
Our Drug Test Chamber is designed for drug stability testing with precise temperature and humidity control. They are available in a range of capacities for variable testing needs. They are built with robust stainless steel construction, and high-quality insulation ensures uniform conditions and energy efficiency. These chambers also feature specialized illumination options for simulating diverse environmental conditions. Equipped with a user-friendly digital control system, and data logging capabilities, for reliable and accurate testing for pharmaceuticals.
Drug Stability Test Chamber LDST-A24
- Interior Volume
- 1000 L
- Heat load
- 1000 W
- Temperature Range
- 0℃ to 100 ℃
Drug Stability Test Chamber LDST-A11
- Volume
- 250 L
- Temperature Range
- 0 - 65 °C
- Temperature Fluctuation
- ± 0.5 °C
Drug Stability Chamber with Illumination LDST-B12
- Volume
- 500 L
- Temperature Range(without illumination)
- 0 - 65 °C
- Temperature Range(with illumination)
- 10 °C - 65°C
Drug Stability Test Chamber LDST-A23
- Interior Volume
- 800 L
- Heat load
- 1000 W
- Temperature Range
- 0℃ to 100 ℃
Ozone Test Chamber
Labtron Ozone Test Chamber are designed for precise environmental testing with controlled ozone generation. These are equipped with advanced temperature and humidity control systems and ensure consistent testing parameters. They offer flexibility to adjust ozone output settings for a broad spectrum of testing needs. Our chamber programmable operations for precise evaluation of materials to meet high performance and regulatory standards.
Ozone Test Chamber LOC-A14
- Diameter of holder (mm)
- 900
- Length of each side (mm)
- 460
- Temperature range
- 0℃ ~ 100℃
Ozone Test Chamber LOC-A11
- Diameter of holder (mm)
- 400
- Length of each side (mm)
- 180
- Temperature range
- 0℃ ~ 100℃
Ozone Test Chamber LOC-A10
- Temperature range
- 0℃ ~ 100℃
- Humidity range
- 30 % - 98 % R.H
- Temperature fluctuation
- ± 0.5 ℃
Ozone Test Chamber LOC-A12
- Diameter of holder (mm)
- 600
- Length of each side (mm)
- 220
- Temperature range
- 0℃ ~ 100℃
Plant Growth Chamber
Labtron Plant Growth Chamber features precise temperature and humidity control for optimal plant development. These chamber feature adjustable shelves and provide flexibility to accommodate various plant sizes. They are integrated with a user-friendly interface for real-time monitoring of variable parameters. Our Plant Growth Chambers come in various capacities to meet diverse research needs, offering both lighting and non-lighting options.
Salt Spray Test Chamber
Labtron Salt Spray Test Chambers offers a diverse range of capacities to accommodate various testing needs. Our chamber features dual spray types, and provides flexibility in testing methods, ensuring accurate evaluation of corrosion resistance. They employ precise spray deposition rates to enable accurate simulation and assess material durability. These chambers are integrated with advanced monitoring systems for reliability and accuracy in corrosion testing.
Salt Spray Test Chamber LSSC-A13
- Testing room capacity
- 780 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95% to 98% RH
Salt Spray Test Chamber LSSC-A14
- Testing room capacity
- 1030 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95% to 98% RH
Salt Spray Test Chamber LSSC-A15
- Testing room capacity
- 1600 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95% to 98% RH
Salt Spray Test Chamber LSSC-A10
- Testing room capacity
- 110 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95 to 98% RH
Popular Categories
Navigation
Contact Us Map