Drug Stability Test Chamber LDST-A24 designed with 1000L internal capacity volume. It offers 20 to 98 % RH humidity range and temperature ranges from 0℃ to 100℃. Designed to simulate constant climatic conditions for testing a wide variety of pharmaceutical raw Drug material or finished Drug products for their quality, performance, shelf life and stability. It features conductive film located on the interior glass (of double layer 8 cm thick insulation glass) to prevent window frosting, built-in LED light for the work room lighting to clearly observe samples. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field.
| Interior Volume | 1000 L |
| Heat load | 1000 W |
| Temperature Range | 0℃ to 100 ℃ |
| Temperature Deviation in time | ± 2.0 ℃ |
| Temperature Fluctuation | ± 0.5 ℃ |
| Humidity Range | 20% to 98% RH |
| Humidity Deviation in time | ± 2.5% RH |
| Cooling Rate | 1 ℃ / min |
| Heating Rate | 3 ℃ / min |
| Cooling system | Mechanical compression refrigeration system |
| Refrigerating unit | French TECUMSEH compressor |
| Refrigerant | R404A, R23 |
| Heating Element | Nichrome heater |
| Controller | Programmable color LCD touch screen controller Ethernet connection, PC Link |
| Water supply system | Automatic water supply Water purification system |
| Humidifier | External isolation, stainless steel surface evaporation humidifier |
| Dehumidification | Evaporator |
| Temperature Sensor | PTR Platinum Resistance PT100 Ω/MV A-class, accuracy 0.001℃ |
| Humidity Sensor | Dry and wet bulb sensor |
| Build-in Water Tank | 270 × 300 × 450 mm |
| View Window Size | 300 × 370 mm |
| Air Circulation | Centrifugal wind fan |
| Exterior Material | Steel Plate with protective coating |
| Interior Material | SUS304 stainless steel |
| Thermal Insulation | Polyurethane foam and insulation cotton |
| Observation Window | Interior lighting, double-layer thermo stability silicone rubber sealing |
| Standard Configuration | 1 Cable hole (Φ 50,) with plug; 2 shelves |
| Maximum Noise | 65 dBA |
| Ambient Temperature | 5℃ to +35 ℃ |
| Relative Humidity | ≤ 85% RH |
| Internal dimension | 1000 × 1000 × 1000 mm |
| External dimension | 1500 × 1550 × 2110 mm |
| Power Supply | 220 V, 50 Hz / 380 V, 50 Hz |
| Net weight | 570 kg |
| Gross weight | 630 kg |
- Designed with PID controller system to control main unit, temperature system and Display
- Double layer insulating glass 8 cm thick, made of tempered glass
- Internal material designed with mirror surface finishing, 304 stainless steel which is rust proof, corrosion resistance
- Heat load can absorb 1000 W in -20℃
- Built-in LED light for the working room light which clearly observe samples
- The filter element is suggested to be replaced once a year
- Water re-circulation system consisting of water purifier which purifies sourced water to water tank, reduces water use and series of pipes
- Designed with PT-100 sensor, real time accurate detection and display of temperature
- Wet gauze and a real-time temperature, converted by temperature difference, show real-time relative humidity
- LCD display, which can display test conditions
- Equipped with automatic humidification, which automatically heated by the humidification tank
- High and low temperature corrosion resistance external material is made up of A3 steel plate with galvanized coating
- Provides protection against over temperature, water shortage, over current, earth leakage, phase sequence, humidifier dry combustion, and refrigerant high pressure
- 10 cm thick polyurethane foam and insulation cotton provides better insulation
- Standard test Cable hole 50 mm inner diameter, located at left side of work room, is provided with sieve inside to prevent moisture from entering the room
- SUS304 stainless steel shelves, standard configuration 2 pcs (removable, adjustable height), 50 kg sample load of each shelf
- 4 movable castors for ease moving, and with brakes function
Drug Test Chamber
Our Drug Test Chamber is designed for drug stability testing with precise temperature and humidity control. They are available in a range of capacities for variable testing needs. They are built with robust stainless steel construction, and high-quality insulation ensures uniform conditions and energy efficiency. These chambers also feature specialized illumination options for simulating diverse environmental conditions. Equipped with a user-friendly digital control system, and data logging capabilities, for reliable and accurate testing for pharmaceuticals.
Drug Stability Test Chamber LDST-A20
- Interior Volume
- 100 L
- Heat load
- 1000 W
- Temperature Range
- 0℃ to 100 ℃
Drug Stability Test Chamber LDST-A10
- Volume
- 150 L
- Temperature Range
- 0 - 65 °C
- Temperature Fluctuation
- ± 0.5 °C
Drug Stability Test Chamber LDST-A22
- Interior Volume
- 500 L
- Heat load
- 1000 W
- Temperature Range
- 0℃ to 100 ℃
Drug Stability Test Chamber LDST-A12
- Volume
- 500 L
- Temperature Range
- 0 - 65 °C
- Temperature Fluctuation
- ± 0.5 °C
Ozone Test Chamber
Labtron Ozone Test Chamber are designed for precise environmental testing with controlled ozone generation. These are equipped with advanced temperature and humidity control systems and ensure consistent testing parameters. They offer flexibility to adjust ozone output settings for a broad spectrum of testing needs. Our chamber programmable operations for precise evaluation of materials to meet high performance and regulatory standards.
Ozone Test Chamber LOC-A14
- Diameter of holder (mm)
- 900
- Length of each side (mm)
- 460
- Temperature range
- 0℃ ~ 100℃
Ozone Test Chamber LOC-A13
- Diameter of holder (mm)
- 700
- Length of each side (mm)
- 350
- Temperature range
- 0℃ ~ 100℃
Ozone Test Chamber LOC-A12
- Diameter of holder (mm)
- 600
- Length of each side (mm)
- 220
- Temperature range
- 0℃ ~ 100℃
Ozone Test Chamber LOC-A10
- Temperature range
- 0℃ ~ 100℃
- Humidity range
- 30 % - 98 % R.H
- Temperature fluctuation
- ± 0.5 ℃
Plant Growth Chamber
Labtron Plant Growth Chamber features precise temperature and humidity control for optimal plant development. These chamber feature adjustable shelves and provide flexibility to accommodate various plant sizes. They are integrated with a user-friendly interface for real-time monitoring of variable parameters. Our Plant Growth Chambers come in various capacities to meet diverse research needs, offering both lighting and non-lighting options.
Salt Spray Test Chamber
Labtron Salt Spray Test Chambers offers a diverse range of capacities to accommodate various testing needs. Our chamber features dual spray types, and provides flexibility in testing methods, ensuring accurate evaluation of corrosion resistance. They employ precise spray deposition rates to enable accurate simulation and assess material durability. These chambers are integrated with advanced monitoring systems for reliability and accuracy in corrosion testing.
Salt Spray Test Chamber LSSC-A15
- Testing room capacity
- 1600 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95% to 98% RH
Salt Spray Test Chamber LSSC-A13
- Testing room capacity
- 780 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95% to 98% RH
Salt Spray Test Chamber LSSC-A14
- Testing room capacity
- 1030 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95% to 98% RH
Salt Spray Test Chamber LSSC-A11
- Testing room capacity
- 326 L
- Temperature range
- Ambient to +60°C
- Humidity range
- 95 to 98% RH
Sand and Dust Test Chamber
In order to increase the durability of product, we need to test its performance under various conditions. Keeping this in mind, Labtron presents sand test chambers which simulate dust and sand conditions in a controlled atmosphere.
Sand and Dust Test Chamber LSC-A13
- Temperature range
- Ambient to + 50 ℃
- Relative Humidity
- < 30 % RH
- Normal wire diameter
- 50 um
Sand and Dust Test Chamber LSC-A12
- Temperature range
- Ambient to + 50 ℃
- Relative Humidity
- < 30 % RH
- Normal wire diameter
- 50 um
Sand and Dust Test Chamber LSC-A10
- Temperature range
- Ambient to + 50 ℃
- Relative Humidity
- < 30 % RH
- Normal wire diameter
- 50 um
Sand and Dust Test Chamber LSC-A11
- Temperature range
- Ambient to + 50 ℃
- Relative Humidity
- < 30 % RH
- Normal wire diameter
- 50 um
Popular Categories
Navigation
Contact Us Map