Standard strip cutter TP-G10

Crush tester TP-L10

• Measurement range
• 5 to 500 N, 50 to 3000 N

• Resolution
• 1 N

• Accuracy
• ± 1 %

Carton compression tester TP-I11

• Measuring range
• 1 to 50 kN

• Indication error
• < ± 1%

• Platen Size
• 800×800 mm/ 1000×1000 mm/ 1200×1200 mm/ 1500×1500 mm (customized)

Automatic horizontal tensile tester TP-B12

• Sample (size) length
• 180 mm (180, 150, 100, 90, 50 mm adjustable)

• Sample width
• 15 mm

• Measuring range
• 0 to 30, 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N

Water absorption tester TP-C20

• Measurement range
• 0 to 200 mm

• Specimen size
• 15×250 mm

• Division value
• 1 mm

Vacuum Leak Tester TVLT-A10

• Vacuum degree
• 0 to 90 KPa

• Accuracy
• 1 % FS

• Resolution
• 0.1 KPa

Vicat softening temperature & HDT machine TVHT-A10

• Operating temperature
• Ambient temperature to 300°C

• Heating rate
• 50°C/ h (5 ± 0.5°C/ 6 min) , 120°C/ h (12 ± 1°C/ 6 min)

• Maximum temp. error with heating speed
• ± 5°C under 50°C/ h, ± 1°C under 120°C/ h

Aging Oven TAO-A10

• The maximum temperature
• 300°C

• Temperature fluctuation
• Within ± 0.5°C

• Temperature uniformity
• Within ± 1°C

Melt flow Indexer TMFI-A11

• Measuring range
• 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)

• Measuring rate
• 0.001 S

• Temperature range
• 50 to 400°C

DIN abrasion tester TDAT-A10

• Test arm weight
• 2.5 N

• Additional Loads
• 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,

• Idler
• 150 mm

Mooney viscometer TMV-A10

• Control temperature range
• Normal temperature to 200°C

• Temperature display resolution
• 0.01°C

• Temperature control accuracy
• ± 0.3°

Three roll mill machine TRMM-A10

• Mixed capacity
• 0.5 to 1 kg, 2 to 3 kg, 5 to 7 kg

• Temperature range
• RT to 300°C

• Temperature control system
• PID control

Rubber low temperature brittleness tester TRBT-A10

• Temperature range
• -60°C to 0°C

• Temperature accuracy
• ± 0.5°C

• Impact speed
• 2 m/s ± 0.2 m/s

Portable Vibration Calibrator LPVC-A10

• Frequency (continually adjustable)
• 10 Hz to1280 Hz + 0.01 %

• Amplitude acceleration ( at 30m/s2 pk )
• 40 Hz to 320 Hz + 0.3 dB + 1 digit

• Amplitude velocity ( at 25mm / sec pk )
• 40 Hz to 320 Hz + 0.5dB +1 digit

Rockwell hardness meter TRHM-A10

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Total test force dwell time
• 0 to 30 S

Digital low load Vickers Hardness tester TDVH-A10

• Test force
• 9.8 N, 49 N, 98 N, 196 N, 294 N, 490 N

• Hardness value symbol
• HV1, HV5, HV10, HV20, HV30, HV250

• Error range in display
• ± 3.0 %, ± 2.0 %

Rockwell hardness meter (motorized type) TRHM-B10

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Brinell hardness test
• 306, 613, 1839 N

Benchtop gloss meter TBGM-A10

• Test angle
• 60°

• Gloss aperture
• 2 × 3 mm

• Measurement range
• 0 to 1000 GU