Carton compression tester TP-I11

Automatic horizontal tensile tester TP-B12

• Sample (size) length
• 180 mm (180, 150, 100, 90, 50 mm adjustable)

• Sample width
• 15 mm

• Measuring range
• 0 to 30, 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N

Bekk Smoothness tester TP-L20

• Measuring scope
• ( 1 to 9999) s, divided in to (1 to 15) s, (15 to 300) s, (300 to 9999) s, the automatic (no. more than 200 s)

• Accuracy
• ±0.1 s within 300 s

• Vacuum system volume (ml)
• Bigger volume: 380 ± 1 Smaller volume: 38 ± 1

Paper air permeability tester TP-J10

• Measuring range
• 0 to 1000 ml/min

• Test area
• 10 ± 0.02 cm2

• Area differential pressure
• 1 ± 0.01 kPa

Vertical tensile tester TP-B20

• Sample (size) length
• 0 to 200 mm adjustable

• Sample width
• 15 mm

• Measuring range
• 0 to 30 N (tissue paper), 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N

Vacuum Leak Tester TVLT-A10

• Vacuum degree
• 0 to 90 KPa

• Accuracy
• 1 % FS

• Resolution
• 0.1 KPa

Charpy/ Izod Impact Tester TCI-A10

• Impact Speed & Energy (charpy)
• 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J

• Impact energy (Izod)
• 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J

• Resolution of impact energy
• 0.001 J

Lasting adhesive tester TLAT-A11

• Standard roller
• 2000 ± 50 g

• Testing stations
• 6

• Dimension (L*W*H) tester
• 650×210×550 mm (6 stations)

Heat sealer THS-A10

• Seal temperature
• Room temperature -250°C

• Control accuracy
• ± 0.2°C

• Dwell time
• 0.1 S to 999.9 S

Rubber-weiss plasticity testing machine TRWM-A10

• Temperature range
• RT 50° to 300°

• Temperature accuracy
• ± 1°

• Measuring range
• 0.01 to 25 mm

DIN abrasion tester TDAT-A10

• Test arm weight
• 2.5 N

• Additional Loads
• 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,

• Idler
• 150 mm

Mooney viscometer TMV-A10

• Control temperature range
• Normal temperature to 200°C

• Temperature display resolution
• 0.01°C

• Temperature control accuracy
• ± 0.3°

Rubber low temperature brittleness tester TRBT-A10

• Temperature range
• -60°C to 0°C

• Temperature accuracy
• ± 0.5°C

• Impact speed
• 2 m/s ± 0.2 m/s

Rockwell hardness meter TRHM-A10

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Total test force dwell time
• 0 to 30 S

Digital Brinell hardness Tester TDBH-A10

• Test force
• 612.5 N, 980 N, 1225 N

• Brinell hardness test
• 1837.5 N, 2450 N, 4900 N/7350 N, 9800 N, 14700 N/29400 N

• Hardness measuring area
• 8 to 650 HBW (hard metals steel ball)

Portable Vibration Calibrator LPVC-A10

• Frequency (continually adjustable)
• 10 Hz to1280 Hz + 0.01 %

• Amplitude acceleration ( at 30m/s2 pk )
• 40 Hz to 320 Hz + 0.3 dB + 1 digit

• Amplitude velocity ( at 25mm / sec pk )
• 40 Hz to 320 Hz + 0.5dB +1 digit

Digital low load Vickers Hardness tester TDVH-A10

• Test force
• 9.8 N, 49 N, 98 N, 196 N, 294 N, 490 N

• Hardness value symbol
• HV1, HV5, HV10, HV20, HV30, HV250

• Error range in display
• ± 3.0 %, ± 2.0 %

Benchtop gloss meter TBGM-A10

• Test angle
• 60°

• Gloss aperture
• 2 × 3 mm

• Measurement range
• 0 to 1000 GU