info@labtron.website

Pocket Dissolved oxygen tester LPKDO-A10

Pocket Dissolved oxygen tester LPKDO-A10 is equipped with polarographic sensor to measure dissolved oxygen content. The system menu of dissolved oxygen meter can set 6 parameters which includes the number of calibration points, temperature units etc. It can measure the dissolved oxygen content present in water, waste water, other liquids & solutions.

Dissolved oxygen range	0.0 to 20.0 mg/L (or ppm)
Dissolved oxygen accuracy	± 0.5 mg/L
% of saturation of oxygen	0.0 to 200.0%
Sensor type	Polarographic dissolved oxygen probe
% Saturation of oxygen accuracy	± 10 % F.S.
Temperature compensation range	0 °C to 40 °C, 32 °F to 104 °F
Barometric pressure correction	60.0 to 112.5 kPa, 450 to 850 mmHg
Salinity correction	0 - 35 g/L
Data hold function	Manual or automatic
Power off	Manual or automatic (8 minute after last key is pressed)
Reset function	Yes
Connector	6 pin mini plug
Battery life	Approximately 150 hours
Dimension (L × Dia.)	175 × 40 mm
Weight	100 g

Equipped with polarographic sensor
1 - 2 points calibration using air saturated water & zero oxygen solution
Manual salinity & barometric pressure compensation for better measurement of dissolved oxygen
System menu allows setting the 6 parameters
Automatic temperature compensation for accurate measured value over the entire range
Auto hold function freezes stable, final readings for better viewing and recording
Automatic power off helps to reduce battery power consumption
Waterproof features guarantees protection against harsh conditions
Battery indicator to show the remaining battery capacity
Reset function automatically resumes all the settings to default mode

Pocket Dissolved oxygen tester has applications in water & waste water management industry, aquarium, surface ground water, etc. to detect content of dissolved oxygen.

Dissolved oxygen probe
Dissolved oxygen Electrolyte solution
Membrane cap
AAA batteries
Carrying case

Polarographic sensor
30 ml electrolyte solution per bottle
Membrane cap