Type III Water Purification System LHWP-B13 is a revolutionary, modular design which helps in elimination of large amount of salts and other minerals from water using 2 stages of RO. It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s. Equipped with easy replaceable filters, it’s designed to deliver compliant purified water with clear quality parameters and care free maintenance
| Output of Pure water | ≥ 40 L / hr. |
| Water Type | Type III |
| Configuration | Floor Standing |
| Process | Double Pass RO system |
| Water intake flowrate | ≥ 1- 1.5 L / min |
| Conductivity at 25 °C | < 5 µs / cm |
| pH | 5.0 – 7.5 |
| Oxidizabes | ≤ 0.4 mg / L |
| Evaporation residue | ≤ 2.0 mg / L |
| Electrical requirements | 220 V / 50 Hz |
| Power | ≥ 350 W |
| Dimensions ( L x W x H ) | 340 x 550 x 530 mm |
| Weight | 35 kg |
- Advanced Double Pass reverse osmosis system for excellent water quality
- Type III level water produced
- Source of inlet water – Tap water
- Floor Standing model
- LCD display to monitor the intake of water pressure and various parameters intuitively
- Anti-fouling RO membrane prevention programme
- Online monitoring of water resistance
- Ease of cleansing , disinfecting and draining waste water
- Micro filter membrane to filter out pollutants
- Automatic RO membrane antiscale flushing to extend the life of the RO membrane
Type III Water Purification System
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
Type III Water Purification System LHWP-B10
- Output of Pure water
- ≥ 10 L / hr.
- Water Type
- Type III
- Configuration
- Benchtop
Type III Water Purification System LHWP-B12
- Output of Pure water
- ≥ 30 L / hr.
- Water Type
- Type III
- Configuration
- Benchtop
Type III Water Purification System LHWP-C10
- Output of pure water
- ≥20 L/h
- Water type
- III type
- Configuration
- Desktop
Type III Water Purification System LHWP-A14
- Output of Pure water
- ≥ 50 L / hr.
- Water Type
- Type III
- Configuration
- Floor Standing
Type I and Type III Water Purification System
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
Type I and Type III RO Water Purification System LOTW-A14
- Output of Pure water
- ≥ 50 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 80 L
Type I and Type III RO Water Purification System LOTW-A11
- Output of Pure water
- ≥ 20 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-B10
- Output of Pure water
- ≥ 10 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-B11
- Output of Pure water
- ≥ 20 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type II Water Purification System
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
Type II Water Purification System LTWP-A11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Single Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-A12
- Output of Pure water
- ≥ 30 L / hr.
- Process
- Single Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-A10
- Output of Pure water
- ≥ 10 L / hr.
- Process
- Single Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-A14
- Output of Pure water
- ≥ 50 L / hr.
- Process
- Single Pass RO system
- Water Type
- Type II
Radio Frequency Identification Water Purification System
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
Radio Frequency Identification Water Purification System LRFW-B14
- Output of Pure water
- ≥ 50 L / hr.
- Process
- Double Pass RO system
- Configuration
- Floor Standing
Radio Frequency Identification Water Purification System LRFW-B11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
Radio Frequency Identification Water Purification System LRFW-C10
- Feed Water
- Tap Water , TDS ≤ 400 ppm, Water Temperature: 5 to 40°C
- Water Production Rate
- ≥ 10 L/ h, Ultrapure Water Flow Rate 2 L/ min
- Water Quality (Two Stage)
- Ultrapure water: Resistivity: 18.25 MΩ.cm at 25°C conforms to ASTM CAP NCCLS
Radio Frequency Identification Water Purification System LRFW-A14
- Output of Pure water
- ≥ 50 L / hr.
- Process
- Single Pass RO system
- Configuration
- Floor Standing
UV Water Purification System
UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption
UV Water Purification System LUVW-B10
- Output of Pure water
- ≥ 10 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
UV Water Purification System LUVW-A11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Single Pass RO system
- Configuration
- Benchtop
UV Water Purification System LUVW-A13
- Output of Pure water
- ≥ 40 L / hr.
- Process
- Single Pass RO system
- Configuration
- Floor Standing
UV Water Purification System LUVW-B12
- Output of Pure water
- ≥ 30 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
Popular Categories
Navigation
Contact Us Map