Soil moisture meter TSMM-A10

Soil Water potential tester TSWT-A10

• Measuring range
• 0 to 100 kPa

• Resolution
• 0.01 kPa

• Accuracy
• ± 1 kPa

Soil water hardness meter TSHM-A11

• Maximum load
• 100 kg ( kg and N can be switched automatically)

• Resolution
• 0.01 g

• Accuracy
• ± 0.5 %

Soil Salinity tester TSST-A10

• Salinity Measurement range
• 0.00 to 19.99 ms/cm

• Measuring accuracy
• EC ± 2% full scale

• Temperature Measurement range
• -5 to 50°C

Soil moisture meter TSMM-A11

• Measurement range
• 0 to 90 %

• Resolution
• 0.1 or 0.01

• Accuracy
• ± 5 % n (non-saturation condition)

Mullen burst tester TP-K11

• Measurement range
• 0 to 1600 kPa

• Accuracy
• ± 0.5 % F.S.

• Compression speed
• 95 ± 5 ml/min

Coefficient of friction tester TP-D10

• Measurement range
• 0.01 to 10 N

• Slider weight
• 200 g

• Slider size
• 63×63 mm

Pulp beating (refining) freeness tester TP-C10

• Measurement range
• 0 to 100° SR

• Sealed testing speed
• 100 ± 10 mm/s

• Volume of distilled water
• 1000 ± 5 ml

Whiteness meter TP-A11

• Sample (size) length
• Diameter ≥30 mm, Thickness ≤ 40 mm

• System
• D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mm

• Light source
• D65 as illuminating source

Falling Weight Impact Tester TFWT-A10

• Temperature range
• 10 to 35°C

• Maximum falling height
• 2000 mm

• Resolution of displacement
• 1 mm

Primary adhesive tester TPAT-A10

• Inclined adjustable angle
• 0 to 40°

• Panel width
• 120 mm

• Test area width
• 80 mm

Vacuum Leak Tester TVLT-A10

• Vacuum degree
• 0 to 90 KPa

• Accuracy
• 1 % FS

• Resolution
• 0.1 KPa

Charpy/ Izod Impact Tester TCI-A10

• Impact Speed & Energy (charpy)
• 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J

• Impact energy (Izod)
• 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J

• Resolution of impact energy
• 0.001 J

DIN abrasion tester TDAT-A10

• Test arm weight
• 2.5 N

• Additional Loads
• 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,

• Idler
• 150 mm

Rubber-weiss plasticity testing machine TRWM-A10

• Temperature range
• RT 50° to 300°

• Temperature accuracy
• ± 1°

• Measuring range
• 0.01 to 25 mm

Mooney viscometer TMV-A10

• Control temperature range
• Normal temperature to 200°C

• Temperature display resolution
• 0.01°C

• Temperature control accuracy
• ± 0.3°

Three roll mill machine TRMM-A10

• Mixed capacity
• 0.5 to 1 kg, 2 to 3 kg, 5 to 7 kg

• Temperature range
• RT to 300°C

• Temperature control system
• PID control

Rockwell hardness meter TRHM-A10

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Total test force dwell time
• 0 to 30 S

Rockwell hardness meter (motorized type) TRHM-B10

• Preliminary test force
• 98 N

• Total test force
• 588, 980, 1471 N

• Brinell hardness test
• 306, 613, 1839 N

Digital Brinell hardness Tester TDBH-A10

• Test force
• 612.5 N, 980 N, 1225 N

• Brinell hardness test
• 1837.5 N, 2450 N, 4900 N/7350 N, 9800 N, 14700 N/29400 N

• Hardness measuring area
• 8 to 650 HBW (hard metals steel ball)

Portable Vibration Calibrator LPVC-A10

• Frequency (continually adjustable)
• 10 Hz to1280 Hz + 0.01 %

• Amplitude acceleration ( at 30m/s2 pk )
• 40 Hz to 320 Hz + 0.3 dB + 1 digit

• Amplitude velocity ( at 25mm / sec pk )
• 40 Hz to 320 Hz + 0.5dB +1 digit