Water Purification System LWPS-A10 is a Type I water treatment system and the feed water is RO or distilled water. It mainly consists of pretreatment system, RO system, ultrapure water system conveying unit and control system. It consists of 254 nm UV lamp to remove the bacteria in the system and 185nm UV lamp to reduce TOC. Fully automatic control over the whole process, e.g. automatic water preparation, when water tank is full, automatically stop the system and cut off the power and water. Built-in RO membrane timing automatic flush procedures, and manual RO membrane cleaning button is available.
| Water quality | One stage (Type I) |
| Feed water | RO water /Distilled water Water temperature: 5 ~ 40℃ |
| Resistivity | 18.25 MΩ.cm @ 25 ℃ |
| TOC | < 5ppb |
| Bacteria | < 0.1 cfu/ml |
| Endotoxin | < 0.001 EU/ml |
| Particle | ( > 0.22μm) <1/ml |
| Absorbance | (254nm,1cm optical distance) < 0.001 EU/ml |
| Reactive Silica(SiO2) | < 0.01 ppm |
| RNases | < 0.01 ng/ml |
| DNases | < 4 pg/μl |
| Temperature | 5 ℃ ~ 40 ℃ |
| Humidity | 10 % ~ 80 % |
| Water production rate | Type 1 water flow rate: 1-1.5 L/min |
| Micro filtration | Millipore Millipak 0.22μm membrane or hollowed fiber membrane filter |
| Power supply | 230 V/50 Hz 150 W |
| Main body Dimension (L × W × H) | 340 × 550 × 530 mm (bench type) |
- Millipore BioPak UF membrane to reduce the pyrogen, RNase, DNase
- Ultra-purification system: Millipore ion exchange resin cartridge and special flow design, high ultra-purify efficiency
- Effectively remove the trace ions in water; guarantee the stability of water quality
- Micro filtration: Making the particles content (larger than 0.22μm) is <1/ml and bacteria less than 0.1CFU/ml
- Built-in manual water cycling program and ultrapure water auto-cycle program to keep the water quality of ultrapure water
- Water resistance on-line monitoring, realizing man-machine conversation
- System can be installed on the lab bench
- 30L PE water reservoir with vent valve
Type I and Type III Water Purification System
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
Type I and Type III RO Water Purification System LOTW-B10
- Output of Pure water
- ≥ 10 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-B11
- Output of Pure water
- ≥ 20 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-B12
- Output of Pure water
- ≥ 30 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-B13
- Output of Pure water
- ≥ 40 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 80 L
Type II Water Purification System
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
Type II Water Purification System LTWP-B10
- Output of Pure water
- ≥ 10 L / hr.
- Process
- Double Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-B11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Double Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-B12
- Output of Pure water
- ≥ 30 L / hr.
- Process
- Double Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-B13
- Output of Pure water
- ≥ 40 L / hr.
- Process
- Double Pass RO system
- Water Type
- Type II
Type III Water Purification System
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
Type III Water Purification System LHWP-B10
- Output of Pure water
- ≥ 10 L / hr.
- Water Type
- Type III
- Configuration
- Benchtop
Type III Water Purification System LHWP-B11
- Output of Pure water
- ≥ 20 L / hr.
- Water Type
- Type III
- Configuration
- Benchtop
Type III Water Purification System LHWP-B12
- Output of Pure water
- ≥ 30 L / hr.
- Water Type
- Type III
- Configuration
- Benchtop
Type III Water Purification System LHWP-B13
- Output of Pure water
- ≥ 40 L / hr.
- Water Type
- Type III
- Configuration
- Floor Standing
Radio Frequency Identification Water Purification System
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
Radio Frequency Identification Water Purification System LRFW-B10
- Output of Pure water
- ≥ 10 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
Radio Frequency Identification Water Purification System LRFW-B11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
Radio Frequency Identification Water Purification System LRFW-B12
- Output of Pure water
- ≥ 30 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
Radio Frequency Identification Water Purification System LRFW-B13
- Output of Pure water
- ≥ 40 L / hr.
- Process
- Double Pass RO system
- Configuration
- Floor standing
UV Water Purification System
UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption
UV Water Purification System LUVW-B10
- Output of Pure water
- ≥ 10 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
UV Water Purification System LUVW-B11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
UV Water Purification System LUVW-B12
- Output of Pure water
- ≥ 30 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
UV Water Purification System LUVW-B13
- Output of Pure water
- ≥ 40 L / hr.
- Process
- Double Pass RO system
- Configuration
- Floor standing
Water Purification System (Feed-specific)
Water Purification System LWPS-A11
- Water quality
- Two stage(Type III and type I)
- Feed water
- Tap waterTDS≤400ppm Water temperature: 5-40℃ Type 3 water ≥10L/h
- Conectivity
Water Purification System LWPS-C10
- Output 2nd stage RO water
- 90 liters/hour
- Output ultrapure water
- Up to 2 liters/minute (when tank is full)
- Ultrapure Water Quality
- Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
Water Purification System LWPS-C11
- Output 2nd stage RO water
- 90 liters/hour
- Output ultrapure water
- Up to 2 liters/minute (when tank is full)
- Ultrapure Water Quality
- Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
Deionized Water System
Deionized Water System LDIN-A10
- Output
- 30 liters/hour
- Flow rate
- Up to 2 liters/minute (with pressure tank)
- Pure water outlet
- 2 reverse osmosis water, deionized water
Deionized Water System LDIN-A20
- Output
- 30 liters/hour
- Flow rate
- Up to 2 liters/minute (with pressure tank)
- Pure water outlet
- 2 reverse osmosis water, deionized water