ICP spectrometer LICP-A10 detects trace elements using argon plasma where the atomized liquid sample is injected. With an analyzing rate of 26 elements per minute results can be achieved with lower levels of detection and measurement of trace and ultra-trace elements. Elements can be traced from liquid and solid samples. Detection of liquid flow from the spray chamber by optical drain sensor offers exceptional sensitivity and accuracy.
| Wavelength range ( 3600 lines / mm ) | 180 to 500 nm |
| Wavelength range ( 2400 lines / mm ) | 180 to 800 nm |
| Temperature | 20 ~ 28 °C |
| Elements per minute | 26 elements |
| Humidity | 70% |
| Focal length | 1000 mm |
| Standard deviation | RSD ≤ 1.0 % |
| Correlation coefficient | ≥ 0.9998 |
| Gas source | Argon ( 99.99 % ) |
| Plasma gas flow meter | 100 ~ 1000 L / h |
| Auxillary gas flow meter | 10 ~ 100 L / h |
| Carrier gas flow meter | 10 ~ 100 L / h |
| Cooling water flow rate | 5 liters per min |
| Cooling water temperature | 21 ~ 26 °C |
| Water outlet diameter | Ø 10 mm |
| Line dispersion rate | 0.26 nm |
| Resolving power | ≤ 0.008 nm |
| Incident slit | 20 µm |
| Co-axial sprayer diameter | 6 mm |
| Coil diameter | 25 mm ( 3 turn ) |
| Double room fog diameter | 34 mm |
| Quartz tube torch diameter | 20 mm |
| Mirror dimensions | 78 x 105 x 16 mm |
- Scanning range variance ( 190 nm to 500 nm / 190 nm to 800 nm )
- Rapid analysis – 26 elements per minute
- Temperature range – 20 to 28 °C
- Optical pathway – Czerny-turners
- Low detection limit
- Detection of multi-elements including non-metallic
- Single and multi-element measurement method
- Indication for wavelength error and repeatability
- Range of measurement – common to trace
Used in clinical analysis for detection of metals in biological fluids , environmental analysis for trace element detection in water , soil , plants , pharmaceuticals for traces of catalysts and poison metals like Cd , Pb , industries for noble metal detection
ICP Spectrometer
ICP Spectrometer LICP-A11
- Wavelength range
- 180 to 900 nm
- Elements per minute
- 15 elements
- Temperature
- 29 °C
ICP Spectrometer LICP-B10
- Monochromator Specifications
- Czerny turner
- Solid State Power Specifications
- 27.12 MHz Frequency stability: < 0.05%
- Technical Specifications
- Liquid sample: 0.01 ppm to several thousand ppm Solid or power sample: 0.001% to 70%
XRF Spectrometer
Handheld XRF Spectrometer LXRF-B10
- Analytical Method
- Energy dispersive X-ray fluorescence analytical Method
- Elements Measuring
- Atomic number from 12 to 92 [elements from magnesium (Mg) to uranium (U)] can be measured
- Range
- Simultaneous detector
Handheld XRF Spectrometer LXRF-B11
- Analytical Method
- Energy dispersive X-ray fluorescence analytical Method
- Elements Measuring
- Atomic number from 12 to 92 [elements from magnesium (Mg) to uranium (U)] can be measured
- Range
- Simultaneous detector