Water Purification System LWPS-A11

Overview

Water Purification System LWPS-A11 mainly consists of two stages of water quality and its feed water is tap water. It follows type III and type I systems. Features pretreatment system, RO system, ultrapure water system conveying unit and control system. Fully automatic control over the whole process, e.g. automatic water preparation, when water tank is full, automatically stop the system and cut off the power and water. Built-in RO membrane timing automatic flush procedures, and manual RO membrane cleaning button is available.

Specifications :

Water quality	Two stage(Type III and type I)
Feed water	Tap waterTDS≤400ppm Water temperature: 5-40℃ Type 3 water ≥10L/h
Conectivity	<5 μs/cm@25℃
Resistivity	18.25 MΩ.cm @ 25 ℃
TOC	< 5ppb
Bacteria	< 0.1 cfu/ml
Endotoxin	< 0.001 EU/ml
Particle	( > 0.22μm) <1/ml
Absorbance	(254nm,1cm optical distance) < 0.001 EU/ml
Reactive Silica(SiO2)	< 0.01 ppm
RNases	< 0.01 ng/ml
DNases	< 4 pg/μl
Temperature	5 ℃ ~ 40 ℃
Humidity	10 % ~ 80 %
Water production rate	Type 1 water flow rate: 1-1.5L/min
Micro filtration	Millipore Millipak 0.22μm membrane or hollowed fiber membrane filter
Power supply	230 V/50 Hz 150 W
Main body Dimension (L × W × H)	340 × 550 × 530 mm (bench type)

Features :

• -  Millipore BioPak UF membrane to reduce the pyrogen, RNase, DNase
• -  Ultra-purification system: Millipore ion exchange resin cartridge and special flow design, high ultra-purify efficiency
• -  Effectively remove the trace ions in water; guarantee the stability of water quality
• -  Micro filtration: Making the particles content (larger than 0.22μm) is <1/ml and bacteria less than 0.1CFU/ml
• -  Built-in manual water cycling program and ultrapure water auto-cycle program to keep the water quality of ultrapure water
• -  Water resistance on-line monitoring, realizing man-machine conversation
• -  System can be installed on the lab bench
• -  30L PE water reservoir with vent valve