Portable Conductivity Meter LPCM-A13

Overview

Portable Conductivity Meter LPCM-A13 is adapted with different modes for measuring quality of water on parameters such as conductivity, total dissolved solids, salinity, resistivity and temperature. Due to its portable design, it is suitable for outdoor measurements i.e. on site water testing, remote area water testing and for research purpose. It is reliable and user friendly.

Specifications :

Conductivity	Conductivity measurement range 0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm Conductivity accuracy ±0.5% F.S Conductivity calibration points 1 to 5 points Conductivity calibration solutions 10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom Conductivity resolution 0.001, 0.01, 0.1, 1
TDS	TDS range 0 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt) TDS accuracy ±1 % F.S TDS factor 0.01 to 1.00 (Default 0.5) TDS resolution 0.01, 0.1, 1
Salinity	Salinity range 0.00 to 80.00 ppt, 0.00 to 42.00 psu Salinity accuracy ±1% F.S Salinity measurement modes Practical Salinity (psu) or Natural Seawater (ppt) Salinity resolution 0.01, 0.1, 1
Resistivity	Resistivity range 0.00 to 20 MΩ Resistivity accuracy ±1% F.S Resistivity resolution 0.01, 0.1, 1
Temperature	Temperature measuring range 0 105 °C, 32 to 221 °F Temperature measuring accuracy ± °0.5 C, ± 0.9 °F Temperature calibration points 1 point Temperature resolution 0.1 °C, 0.1 °F
Temperature compensation	0 to 100 °C, 32 to 212 ° F, Manual or Automatic
Temperature coefficient	Linear and Pure water compensation
Reference temperature	20 °C or 25 °C
Stability conditions	Low or high
Cell constant	K= 0.1, 1, 10 or custom
Calibration due	1 to 31 days or off
Memory	500 data sets
Data hold	Manual or auto-end point
Connector	6 pin mini plug
Power Control	Manual or Automatic (10, 20 or 30 minutes after last key pressed)
Power	3 × 1.5 V AA batteries or DC 5 V power adapter
Dimension (L × W × H)	170 × 85 × 30 mm
Weight	300 g

Features :

• -   Common features
• -  Calibration due reminder informs operator to calibrate the meter regularly
• -  Stability indicator displays the status of current measurement
• -  Auto hold function freezes stable, final readings for better viewing and recording
• -  1 to 5 points push button calibration to automatically identify calibration solutions
• -  Selectable temperature units (°C or °F) for different application requirements
• -  Expanded memory stores and recalls up to 500 readings
• -  Calibration report provides details of calibration standard and cell constant
• -  Help message as an operational guide, helps users for quick access to the parameters
• -  Reset function automatically resumes all settings back to factory default options
• -  Store data is transferrable into computer via USB communication interface
• -   Conductivity / TDS/Salinity/ Temperature
• -  Conductivity: 1 to 5 point calibration with automatically identification of calibration solutions
• -  Temperature: Can select cell constant (0.1/1/10) and normalization temperature 20°C or 25°C
• -  TDS and Salinity: TDS conversion factor, seawater, practical salinity measurements mode to meet different water quality measurement requirements
• -  linear and pure water compensation improves the measurement accuracy